Kolstrand 20in Line Hauler Sheave Shim 1/32in Thick - SS

Stainless steel sheave Shim is 1/32" thick and is precision made by Kolstrand for the 20" Line Hauler and the Sea Catcher 3N-S purse winch. Shim is used to adjust the sheave halves by spacing the sheaves.

Kolstrand 20in Line Hauler Sheave Shim 1/16in Thick - SS

Stainless steel sheave shim is 1/16" Thick and is precision made by Kolstrand for the 20" line hauler and the Sea Catcher 3N-S purse winch. Shim is used to adjust the sheave halves by spacing the sheaves.

Kolstrand 20in Line Hauler Sheave Shim 1/8in Thick - SS

Stainless steel sheave shim is 1/8" thick and is precision made by Kolstrand for the 20" LineHauler and the SeaCatcher 3N-S purse winch. Shim is used to adjust the sheave halves by spacing the sheaves.

Kolstrand 20in Line Hauler Sheave Shim 1/4in Thick - SS

Stainless steel sheave Shim is 1/4" thick and is precision made for Kolstrand's SeaCatcher SeaCatcher 3N Winch with 20" sheaves Kolstrand 1/4" thick stainless steel sheave shim for SeaCatcher 3N Winch with 20" Sheaves Kolstrand part No...

Kolstrand Quick-Pin Release for Gillnet Level Wind

Quick-Pin release is used on the Kolstrand Gillnet level wind comes complete with a 12" long lanyard, to secure the quick-pin from being lost overboard. By pushing the button on the quick-pin, and pulling the quick-pin out of the frame. The level wind...

Kolstrand Quick-Pin Release for Power Roller

The all Stainless Steel Quick-pin release for power roller is used on the Kolstrand power net roller comes complete with a 12" long lanyard, to secure the quick-pin from being lost overboard. By pushing the button on the quick-pin, and pulling the...

Kolstrand 20in Stainless Steel Sheave (Pair)

Precision Machined Stainless Steel Main Drive Sheaves fits Kolstrand's 20" LineHauler and 3N SeaCatcher Purse Winch. Sheave Set consists of (2 Each) Sheave Halves - Priced and Sold as a SET of Two.

Kolstrand Steel Galvanized Frame for 20in Line Hauler - With 2 Bolt Style Splitter Mounting

Steel fabricated frame is hot-dipped galvanized for many years of duty in the marine environment. Frame is strengthened to prevent bending under loaded condition, and comes complete with lifting eye installed into the frame - Ready to install.

Kolstrand Clutch Finger Capscrew for Brass Gurdy

Stainless steel cap screw which retains the clutch finger into the clutch, fits Kolstrand's very popular Brass Multi-spool Gurdy. Two cap screws are required per clutch - SOLD AS EACH Note: Older Kolstrand brass multi-spooled Gurdys used a...