Kolstrand W14D12 Special Aluminum Winch with Diamond Screw Level Wind

Product Description

Features

• Winch was manufactured with a larger 6-5/8" diameter drum core with access plate and 'slip-ring' provision
• Winch is also available with a smaller diameter drum core (4-1/2") should you not need the slip ring provision
• Winch comes standard and equipped with a precision machined Diamond Screw Level Wind for precise spooling of the cable onto the drum
• Load-holding Automatic-set Hydraulic Brake Assembly (stacked between the Hydraulic Motor and the Winch frame) is sized to hold the strongest towing loads, and will automatically release, or set and hold your load, while the winch is being operated
• Special aluminum winch with diamond screw level wind has a 2:1 drive reduction for increased performance
• Hydraulic motor with brake assembly is 'tucked' inside behind the drum and between the winch side frames so that winch is more compact
• Directional control valve is furnished with winch, and may be pre-mounted and plumbed onto the winch frame, or furnished as a loose component (should you desire to mount the valve in a more convenient location)

Winch performance

• Based on 10 GPM @ 1500 PSI
• Drum speed: 75 RPM
• Bare drum line pull: 1,660 Lbs.
• Inhaul bare drum line speed: 130 feet per minute
• Full drum line pull: 785 Lbs.
• Inhaul full drum line speed: 275 feet per minute
• Drum capacity: 600 feet 3/8" diameter cable

The displayed Kolstrand special aluminum winch with diamond screw level wind was designed for a customer who needed to use 3/8" diameter electro-mechanical cable to have his 'fish/sensor' communicate with his electronic equipment on deck.