Product Description
Features
- Davit is 'Ready-made' to accept the included -Kolstrand 3" Aluminum Open-Faced Lead Block, and is designed to be rotated outboard to haul, and to rotate inboard when not in use or when the vessel is docking
- Integral davit comes complete with davit rail support and foot Socket
- 12” Diameter stainless steel main drive sheaves grip line Sizes 3/8” diameter to 5/8” diameter
- White hydraulics RE32 Series hydraulic motor
- Equipped with two bronze idler line guides with greaseable stainless steel shaft
- Bronze line splitter
Optional
- Honda 18HP self-contained hydraulic power unit
- Hose kit
Performance
- Line pull @ 1500 PSI is 1,200 Lbs
- Line Pull @ 1800 PSI is 1,500 Lbs
- Maximum continuous pressure is 2000 PSI = 1,600 Lbs Line Pull
- Sheave speed at 14 GPM Input: 96 RPM
NOTE: Integral davit needs to be installed into the vessel adequately to handle not only the weight of the line hauler, but the total intended load. If in doubt, please consult with us or your Naval architect for additional guidance.
Kolstrand's 12" integral line hauler with control valve arrangement may be assembled for use on either the Starboard or port side of the vessel. Select your preference at order entry. Also, as the 12" integral line hauler is plumbed (hosed) between the provided Control valve and the hauler hydraulic motor, we need to know your 'rail height' (at the location where the hauler and davit will be installed) in order to make the hose assemblies long enough, to allow the hauler to pivot inboard as if when the vessel is docking. Please call to select your rail height dimension.
